styrene used for Styrene Isoprene Styrene,
Styrene For SIS Copolymer, styrene used for Styrene Isoprene Styrene production,
Styrene Isoprene Styrene (SIS) polymers are based on styrene and isoprene and has the lowest hardness and lowest viscosity of all the styrenic block copolymers. These thermoplastic resins are easy to process and compatible with various tackifying chemistries. This product range is ideally suited for the production of pressure sensitive adhesives (labels, packaging, diapers) hot melt spray and many other application areas.
CAS Number | 100-42-5 |
EINECS No. | 202-851-5 |
H.S. Code | 2902.50 |
Chemical formula | H2C=C6H5CH |
Chemical Properties | |
Melting point | -30-31 C |
Boling point | 145-146 C |
Specific gravity | 0.91 |
Solubility in water | < 1% |
Vapour density | 3.60 |
Cinnamene; Cinnamenol; Diarex HF 77; Ethenylbenzene; NCI-C02200;Phenethylene; Phenylethene; Phenylethylene; Phenylethylene, inhibited; Stirolo(Italian); Styreen (Dutch); Styrene (CZECH); Styrene Monomer (ACGIH); StyreneMonomer, Stabilized (DOT); Styrol (German); Styrole; Styrolene; Styron; Styropor; Vinylbenzen (CZECH); Vinylbenzene; Vinylbenzol.
Property | Data | Unit |
Bases | A level≥99.5%;B level≥99.0%. | - |
Appearance | colorless transparent oily liquid | - |
Melting point | -30.6 | ℃ |
Boiling point | 146 | ℃ |
Relative density | 0.91 | Water=1 |
Relative vapor density | 3.6 | Air=1 |
Saturated vapor pressure | 1.33(30.8℃) | kPa |
Heat of combustion | 4376.9 | kJ/mol |
Critical temperature | 369 | ℃ |
Critical pressure | 3.81 | MPa |
Octanol/water partition coefficients | 3.2 | - |
Flash point | 34.4 | ℃ |
Ignition temperature | 490 | ℃ |
Upper explosive limit | 6.1 | %(V/V) |
Lower explosive limit | 1.1 | %(V/V) |
Solubleness | Insoluble in water, soluble in alcoho and most organic solvents. | |
Main application | Used for manufacturing polystyrene, synthetic rubber, ion-exchange resin ,etc. |
Packaging Detai: Packed in 220kg/drum,17 600kgs/20’GP
ISO TANK 21.5MT
1000kg/drum, Flexibag, ISO tanks or according to customer`s request.
Used in the manufacture of rubbers, plastics, and polymers.
a) Production of: expandable polystyrene (EPS);
b) Production of polystyrene (HIPS) and GPPS;
c) Production of styrenic co-polymers;
d) Production of unsaturated polyester resins;
e) Production of styrene-butadiene rubber;
f) Production of styrene-butadiene latex;
g) Production of styrene isoprene co-polymers;
h) Production of styrene based polymeric dispersions;
i) Production of filled polyols. Styrene is mainly used as a monomer for the manufacture of polymers (such as polystyrene, or certain rubber and latex)