Products
PriceList For Styrene Used For Thermoplastics - Styrene monomer CAS 100-42-5 – CHUANGJINYUAN
PriceList For Styrene Used For Thermoplastics - Styrene monomer CAS 100-42-5 – CHUANGJINYUAN Detail:
Product Features
| CAS Number | 100-42-5 |
| EINECS No. | 202-851-5 |
| H.S. Code | 2902.50 |
| Chemical formula | H2C=C6H5CH |
| Chemical Properties | |
| Melting point | -30-31 C |
| Boling point | 145-146 C |
| Specific gravity | 0.91 |
| Solubility in water | < 1% |
| Vapour density | 3.60 |
Synonyms
Cinnamene; Cinnamenol; Diarex HF 77; Ethenylbenzene; NCI-C02200;Phenethylene; Phenylethene; Phenylethylene; Phenylethylene, inhibited; Stirolo(Italian); Styreen (Dutch); Styrene (CZECH); Styrene Monomer (ACGIH); StyreneMonomer, Stabilized (DOT); Styrol (German); Styrole; Styrolene; Styron; Styropor; Vinylbenzen (CZECH); Vinylbenzene; Vinylbenzol.
Certificate of Analysis
| Property | Data | Unit |
| Bases | A level≥99.5%;B level≥99.0%. | - |
| Appearance | colorless transparent oily liquid | - |
| Melting point | -30.6 | ℃ |
| Boiling point | 146 | ℃ |
| Relative density | 0.91 | Water=1 |
| Relative vapor density | 3.6 | Air=1 |
| Saturated vapor pressure | 1.33(30.8℃) | kPa |
| Heat of combustion | 4376.9 | kJ/mol |
| Critical temperature | 369 | ℃ |
| Critical pressure | 3.81 | MPa |
| Octanol/water partition coefficients | 3.2 | - |
| Flash point | 34.4 | ℃ |
| Ignition temperature | 490 | ℃ |
| Upper explosive limit | 6.1 | %(V/V) |
| Lower explosive limit | 1.1 | %(V/V) |
| Solubleness | Insoluble in water, soluble in alcoho and most organic solvents. | |
| Main application | Used for manufacturing polystyrene, synthetic rubber, ion-exchange resin ,etc. | |
Package and Delivery
Packaging Detai: Packed in 220kg/drum,17 600kgs/20’GP
ISO TANK 21.5MT
1000kg/drum, Flexibag, ISO tanks or according to customer`s request.
Product Application
Used in the manufacture of rubbers, plastics, and polymers.
a) Production of: expandable polystyrene (EPS);
b) Production of polystyrene (HIPS) and GPPS;
c) Production of styrenic co-polymers;
d) Production of unsaturated polyester resins;
e) Production of styrene-butadiene rubber;
f) Production of styrene-butadiene latex;
g) Production of styrene isoprene co-polymers;
h) Production of styrene based polymeric dispersions;
i) Production of filled polyols. Styrene is mainly used as a monomer for the manufacture of polymers (such as polystyrene, or certain rubber and latex)
Product detail pictures:
Related Product Guide:
Our solutions are widely recognized and trusted by consumers and will meet up with constantly developing financial and social requires for PriceList For Styrene Used For Thermoplastics - Styrene monomer CAS 100-42-5 – CHUANGJINYUAN , The product will supply to all over the world, such as: Tajikistan, Benin, Luxembourg, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Alexander from Canada - 2018.06.28 19:27
The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
By Griselda from Venezuela - 2018.05.15 10:52
